HG6000E
The Vermeer HG6000E electric horizontal grinder offers wood-waste processing customers a powerful option that can help save energy and reduce operating costs.
Two 300 hp (223.7 kW) mill motors provide plenty of power to the drum, which features reversible hammers and cutter blocks for longer life and optimum cutting performance. Down-pressure from the feed roller helps feed bulky and oversized material into the drum; the feed roller is easily reversible so the operator can reposition irregular material as necessary.
The HG6000E provides multiple configurations and conveyor options to help meet jobsite constraints. The skid-mounted unit offers a 14' (4.3 m) or 20' (6.1 m) infeed conveyor length and three options for the discharge conveyor, including a belly, fixed or folding conveyor. A trailer-mounted option is also available when additional mobility is needed.
| General (trailer mount with long infeed | ||
| Maximum Width (transport) | 106.8 " | 271.3 cm |
| Maximum Length (transport) | 45.4 ' | 13.8 m |
| Maximum Length (with hitch) | 68.4 ' | 20.8 m |
| Maximum Height (transport) | 158.4 " | 402.3 cm |
| Weight | 12060 lbs | 5470.3 kg |
| Tongue Weight | 12060 lbs | 5470.3 kg |
| Axle Weight | 46720 lbs | 21191.8 kg |
| General (skid mount with short infeed) | ||
| Maximum Width | 106.8 " | 271.3 cm |
| Maximum Length - Belly Conveyor | 30.6 ' | 9.3 m |
| Maximum Height - Belly Conveyor | 11.9 ' | 3.6 m |
| Maximum Length - Fixed Conveyor | 40.8 ' | 12.4 m |
| Maximum Height - Fixed Conveyor | 12.1 ' | 3.7 m |
| Maximum Length - Folding Conveyor | 53.9 ' | 16.4 m |
| Maximum Height - Folding Conveyor | 12.7 ' | 3.9 m |
| Weight | 51500 lbs | 23360 kg |
| General (skid mount with long infeed) | ||
| Maximum Width | 106.8 " | 271.3 cm |
| Maximum Length - Belly Conveyor | 35.9 ' | 10.9 m |
| Maximum Height - Belly Conveyor | 11.9 ' | 3.6 m |
| Maximum Length - Folding Conveyor | 59.2 ' | 18 m |
| Maximum Height - Folding Conveyor | 12.7 ' | 3.9 m |
| Maximum Length - Fixed Conveyor | 46.1 ' | 14.1 m |
| Maximum Height - Fixed Conveyor | 12.1 ' | 3.7 m |
| Weight | 55500 lbs | 25174.4 kg |
| Electric Fan Motor Option 1 | ||
| Manufacturer | Toshiba | |
| Voltage | 460 | |
| Frame | 145TC | |
| Electric Hydraulic Motor Option 1 | ||
| Manufacturer | Toshiba | |
| Frame | 364TR | |
| Horsepower | 60 hp | 44.7 kw |
| Voltage | 460 | |
| Frequency | 60 Hz | |
| Phase | 3 | |
| Electric Mill Motor Option 1 | ||
| Manufacturer | Toshiba | |
| Frame | N587UZQ | |
| Horsepower | 300 hp | 223.7 kw |
| Voltage | 460 | |
| Frequency | 60 Hz | |
| Phase | 3 | |
| Rated Speed | 1780 mph | 2864.6 km/h |
| Enclosure | TEFC | |
| Full Load Amps | 350 | |
| Locked Rotor Amps | 2180 | |
| Service Factor | 1.15 | |
| Duty Cycle | Continuous | |
| NEMA Design | B | |
| Insulation Class | FBK1 | |
| Full Load Torque | 883 ft-lb | 1197.2 Nm |
| Locked Rotor (%) | 260 | |
| Break Down (%) | 216 | |
| Ambient Temperature | 40 c | 1352 f |
| Nominal Efficiency | 94.1 | |
| Power Factor | 85.7 | |
| Approximate Weight | 3850 lbs | 1746.3 kg |
| Electric Fan Motor Option 2 | ||
| Manufacturer | Weg | |
| Frame | 145T | |
| Horsepower | 2 hp | 1.5 kw |
| Voltage | 380-415 | |
| Frequency | 50 Hz | |
| Phase | 3 | |
| Rated Speed | 1430 rpm | |
| Enclosure | TEFC | |
| Full Load Amps | 3.52-3.22 | |
| Locked Rotor Amps | 20.8-19.0 | |
| Service Factor | 1.15 | |
| Duty Cycle | S1 | |
| NEMA Design | A | |
| Insulation Class | F | |
| Full Load Torque | 7.25 ft-lb | 9.8 Nm |
| Locked Rotor (%) | 170 | |
| Break Down (%) | 210 | |
| Ambient Temperature | 40 c | 1352 f |
| Nominal Efficiency | 80 | |
| Power Factor | 81 | |
| Approximate Weight | 47.8 lbs | 21.7 kg |
| Electric Hydraulic Motor Option 2 | ||
| Manufacturer | Weg | |
| Frame | 364/5T | |
| Horsepower | 60 hp | 44.7 kw |
| Voltage | 380/415 | |
| Frequency | 50 Hz | |
| Phase | 3 | |
| Rated Speed | 1475 rpm | |
| Enclosure | TEFC | |
| Full Load Amps | 3.52-3.22 | |
| Locked Rotor Amps | 20.8-19.0 | |
| Service Factor | 1.15 | |
| Duty Cycle | S1 | |
| NEMA Design | A | |
| Insulation Class | F | |
| Full Load Torque | 7.25 ft-lb | 9.8 Nm |
| Locked Rotor (%) | 170 | |
| Break Down (%) | 210 | |
| Ambient Temperature | 40 c | 1352 f |
| Nominal Efficiency | 80 | |
| Power Factor | 81 | |
| Approximate Weight | 47.8 lbs | 21.7 kg |
| Electric Mill Motor Option 2 | ||
| Manufacturer | Weg | |
| Frame | 586/7T | |
| Horsepower | 300 hp | 223.7 kw |
| Voltage | 380/415 | |
| Frequency | 50 Hz | |
| Phase | 3 | |
| Rated Speed | 1490 rpm | |
| Enclosure | TEFC | |
| Full Load Amps | 415/380 | |
| Locked Rotor Amps | 3030/2770 | |
| Service Factor | 1.15 | |
| Duty Cycle | S1 | |
| NEMA Design | A | |
| Insulation Class | F | |
| Full Load Torque | 1040 ft-lb | 1410.1 Nm |
| Locked Rotor (%) | 250 | |
| Break Down (%) | 270 | |
| Ambient Temperature | 40 c | 1352 f |
| Nominal Efficiency | 95.8 | |
| Power Factor | 84 | |
| Approximate Weight | 3371 lbs | 1529.1 kg |
| Infeed System | ||
| Feed Table Width | 60 " | 152.4 cm |
| Feed Table Length (Option 1) | 20 ' | 6.1 m |
| Feed Table Length (Option 2) | 14 ' | 4.3 m |
