HG365E Horizontal Grinder
On-site power, same great performance. Flexibility was a key objective in the design of the HG365E, which can be configured to meet a wide variety of on-site, electric-powered grinding applications. A 250 HP (186.5 kw), 460-volt three-phase Baldor electric motor powers the hammermill, while all other hydraulic functions are driven by a separate 50 HP (37.28 kw) Baldor motor. The HG365E offers the same innovative and labor saving features - such as the SmartGrind system and the patented Duplex Drum Rotor - as the mobile Vermeer HG365, which joined the Vermeer grinder family in 2001.
| General | ||
| Weight | 32040 lbs | 14533.1 kg |
| Transportation Length | 25.6 ' | 7.8 m |
| Width | 8.4' | |
| Height | 119 " | 302 cm |
| Electric Fan Motor Option 1 | ||
| Manufacturer | Baldor Motors | |
| Fan Motor | 1 HP | |
| Hydraulic Motor | 50 HP | 37.3 kw |
| Mill Motor | 250 HP | 186.4 kw |
| 1 HP Electrical Spec | 35WGS396 | |
| 50 HP Electrical Spec | 12WGX270 | |
| 250 HP Electrical spec | 18WGX396 | |
| RPM | 1750 rpm | |
| Hertz | 3 Phase, 60 Hertz, 460 Volts (All Motors) | |
| Engine | ||
| Gross HP at Full RPM | 250 HP | 186.4 kw |
| Infeed System | ||
| Feed Roller Diameter | 28 " | 71 cm |
| Feed Table Width | 50 " | 127 cm |
| Feed Table Length (Option 2) | 14 ' | 4.3 m |
| Feed Throat Height | 24 " | 61 cm |
| Feed Roller Down Pressure | Hydraulic manual control | |
| Feed Table Type | Chain and Slat | |
| Discharge | ||
| Belly Converyor Width | 48 " | 122 cm |
| Hammermill | ||
| Rotor Tip Diameter | 29 " | 74 cm |
| Rotor Cutting Length | 46 " | 117 cm |
| Controls | ||
| Stationary | Side Mounted control station | |
| Remote | Optional | |
