Stump Cutters - Tree Care and Landscaping Equipment and Machinery

Friday, November 20, 2009

Features & Benefits

Feature: Cutter Wheel Drive System
Benefit: The cutter wheel drive system eliminates the bottom drive-belt alignment. It reduces some routine maintenance as compared to complete belt-drive systems. A gearbox direct drive system offers an efficient transfer of hp from the engine to the cutter wheel. The upper and lower gearbox, as well as the driveshaft, is covered by a 3-yr/3000-hr limited warranty.

Feature: Electric Clutch Engagement
Benefit: This design eliminates manual manipulation of a belt tensioner or engine slide adjustment to engage cutter wheel and extends life.

Feature: Operator Presence System
Benefit: With this safety system, the cutter wheel will automatically stop when the operator releases the hydraulic cutter wheel controls.

Feature: Two-Speed Ground Drive
Benefit: Allows operators to travel between stumps or from the trailer to the stump quickly while still giving them a slower controlled creep speed during operation.

Feature: Visibility
Benefit: This design allows the operator to cut stumps located closer to buildings, sidewalks or other obstructions while reducing the number of "interference or hang-up" situations which commonly occur while cutting deep roots.

Feature: Optional AutoSweep
Benefit: This feature is designed to reduce engine, drivetrain and structural stress. AutoSweep also eliminates some operator interface resulting in increased productivity.

Feature: Hydraulic Front Steer
Benefit: Control lever location is convenient and easily accessible to the operator, while the system provides maneuverability in tough conditions.

Feature: Differential Lock Engagement
Benefit: With the differential lock at the control station, there is no need to leave the controls to engage or disengage a drive wheel.

Feature: Automatic Parking Brake
Benefit: Automatic brakes help eliminate disturbance to lawns that can be caused by machines with stakedown devices.

Feature: Compact Footprint
Benefit: The width allows operator access through gates or into confined spaces.

Feature: Manual Sweep Rate Adjustment
Benefit: Depending upon the type of material being cut, the operator can manually regulate the sweep rate by twisting the sweep rate control on the control panel.

Feature: Ground Pressure
Benefit: The SC372's lightweight stature and dual drive tires offer low ground pressure and increased floatation in soft soil conditions.

Feature: Chip Containment Capacity
Benefit: Chip containment results in less cleanup and easier backfill of the hole after the stump cutting job is complete.

Feature: Oscillating Front Steering Axle
Benefit: An oscillating front steering axle improves ground contact for better stability and tractive effort in uneven ground conditions.

Feature: Yellow Jacket Cutter System
Benefit: The Yellow Jacket Cutter System is designed to provide faster, easier serviceability, as well as extended pocket and tooth life.

Feature: Optional Chip Blade
Benefit: The chip blade reduces the amount of manual work during jobsite clean-up.

Feature: Optional 4-Wheel Drive
Benefit: This feature offers increased traction and maneuverability in difficult transport conditions.

SC372

Expect big results from this compact package. The SC372 combines power and agility into one simple machine. At only 35" (88.9 cm) wide with dual tires removed, the SC372 can easily navigate through gates and operate in confined space; and it's so lightweight, your footprint won?t be noticed.

The optional patented AutoSweep system monitors engine speed and automatically adjusts the cutter wheel sweep rate to maximize productivity and reduce premature wear.

General
Length - Tongue In	124 "	315 cm
Transport Width (without duals)	34.8 "	88.4 cm
Transport Width (with duals)	49.5 "	125.7 cm
Width with dual wheel option (additional)	14.7 "	37.3 cm
Transport Height	59 "	149.9 cm
Transport Height - Engine Option 2	55.5 "	141 cm
Weight with Engine Option 1	1860 lbs	843.7 kg
Weight with Engine Option 2	2270 lbs	1029.7 kg
Weight with four wheel drive and chip blade	200 lbs	90.7 kg
Sound Power - Engine Option 2	107.7 dB(a)
Sound Power - Engine Option 1	109 dB(a)
Main Frame
Frame Construction	1/4" (0.6 cm) grade 50 plate
Control Station Description	Fixed
Toolbox Description	Standard
Tires	(Quantity 6) 5.70 x 8 tires with Xtra Grip tread
Brake Type	Spring-applied	Hydraulically released dual parking brakes
Steerable Axle Type	Oscillating two wheel steering
Degree of Oscillation	15 deg
Cutter Wheel/Drive
Upper Gearbox	Straight Bevel
Lower Gearbox	Straight Bevel
Reversible Pockets	Yes
Cutterwheel Guard	Standard
Cutterwheel Straight Line Dimension	40 "	101.6 cm
Tooth Description	Yellow Jacket
Belt Type	Vee Belt
Hydraulic System
Recommended Oil Type	Vermeer VMF
Pump flow at maximum RPM	5.6 gpm	21.2 Lpm
Filtration Method	Return flow
System Type	Open loop
System Relief Pressure	1740 psi	120 bar
Flow Control	Yes
Directional Control	Yes
Hydraulic System - Engine Option Two
Recommended Oil Type	Vermeer VMF
System Type	Open loop
Filtration Method	Return flow
Pump flow at maximum RPM	5.8 gpm	22 L/min
System Relief Pressure	1740 psi	120 bar
Flow Control	Yes
Directional Control	Yes
Engine
Make and Model	Briggs and Stratton Vanguard
Horsepower	35 hp	26.1 kw
No. of Cylinders	2
Fuel Tank Capacity	9 gal	34.1 L
Type of Fuel	Gas
Air Cleaner	Dry-type with safety element restriction indicator
Oil Filter	Spin-on
Maximum Angle of Continuous Operation	25 deg
Clutch Type	Electric with brake
Torque (maximum)	53 ft-lb	71.86 Nm
Oil Volume with Filter	2.4 qt	2.3 L
Engine Option 2
Make and Model	Yanmar 3TNV88-BCVR
No. of Cylinders	3
Horsepower	37.8 hp	28.2 kw
Torque (maximum)	79.5 ft-lb	107.79 Nm
Fuel Tank Capacity	9 gal	34.1 L
Type of Fuel	Diesel
Air Cleaner	Dry-type with safety element restriction indicator
Oil Filter	Spin-on
Oil Volume with Filter	7.1 qt	6.7 L
Maximum Angle of Continous Operation	30 deg
Cooling Medium	Liquid anti-freeze
Coolant Capacity (engine and radiator)	8.5 gal	32.2 L
Alternator	40 amp
Clutch Type	Electric with brake
Electrical
Standard Gauges	Hour
Warning Lights	Engine, clutch, and operator presence
Switches	Clutch engage/disengage
Controller	ACS
Shutdown System	Yes - coolant temperature and oil pressure
Options
Special Paint	Optional
Extended Limited Warranty	Optional
Operator Presence System
Description	Controller based automatic disengage and braking	Braking sequence for stopping the cutter wheel.
Sensor Type	Capacitor-based hand sensing
Quantity/Location	3 control handles
Visual Interface	Dual indicator lights for operator hand contact	And cutterwheel engaged
Chip Blade
Chip Blade Dimension	33 " wide	83.8 cm wide
Blade Travel Above Ground	7.6 "	19.3 cm
Blade Travel Below Ground	2.8 "	7.1 cm

Specifications Last Revised: 11/02/2009