SC60TX Tier 4
The Vermeer SC60TX demonstrates why the Vermeer name has become synonymous with stump-cutting innovation. Powered by a 60 hp (44.74 kW) CAT C2.2T turbocharged Tier 4a engine, this self-propelled stump cutter has a wide 51" (129.54 cm) stance for stability in the cutting mode and when needed, the SC60TX undercarriage retracts to a narrow 35" (88.90 cm) width to improve maneuverability in tight spaces.
| General | ||
| Length | 141.6 " | 359.7 cm |
| Width | 51 " | 129.5 cm |
| Height | 72 " | 182.9 cm |
| Weight | 3500 lbs | 1587.6 kg |
| Main Frame | ||
| Chip Contanment | 23 cu ft | .7 cu m |
| Cutter Wheel/Drive | ||
| Upper Gearbox | Straight Bevel | |
| Oil Type | SAE 75W90 synthetic gear oil | |
| Oil Capacity | .44 qt | .4 L |
| Lower Gearbox | Straight Bevel | |
| Wheel Diameter w/o Teeth | 23 " | 58.4 cm |
| Wheel Thickness | 1.13 " | 2.9 cm |
| Wheel Speed | 1080 rpm | |
| Wheel Swing Arc | 57 " | 144.8 cm |
| Wheel Cut Above Ground | 27 " | 68.6 cm |
| Wheel Cut Below Ground | 16 " | 40.6 cm |
| Tooth Style | Yellow Jacket Cutter System | |
| Tooth Quantity | 30 | |
| Number of Indexes | 2 | |
| Number of Pockets | 30 | |
| Reversible Pockets | 30 | |
| Cutterwheel Guard | Standard | |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil | |
| Oil Capacity - Lower Gearbox | 1.63 qt | 1.5 L |
| Driveshaft | Driveshaft dampened | |
| Driveshaft - U Joints | 2 u-joints | |
| Capacities | ||
| Fuel Tank | 12 gal | 45.4 L |
| Hydraulic System | ||
| Pump GPM | 7.2 gpm | 27.3 Lpm |
| System PSI | 2900 psi | 199.9 bar |
| Tank Capacity | 9.6 gal | 36.3 L |
| Filtration | Full-flow 4 micron return filter, suction strainer | |
| Recommended Oil Type | Vermeer VMF | |
| System Type | Tandem gear pump, pressure balanced | |
| Engine | ||
| Make and Model | Caterpillar C2.2T | |
| Horsepower | 60 hp | 44.7 kw |
| Number of Cylinders | 4 | |
| Max Fuel Consumption | 3.6 gph | 13.6 lph |
| Type of Fuel | Diesel | |
| Air Cleaner | Dry-type, restriction indicator | Evacuator valve, safety element |
| Oil Filter | Spin-on | |
| Maximum Angle of Continuous Operation | 35 deg | |
| Cooling Medium | Water / antifreeze | |
| Coolant Capacity (engine and radiator) | 2.88 gal | 10.9 L |
| Alternator | 65 | |
| Fan | 15.4 " | 31.1 cm |
| Clutch Type | Automotive-style diaphram with disc | |
| Maximum Torque | 142 ft-lb | 192.53 Nm |
| Oil Volume with Filter | 11.2 qt | 10.6 L |
| Electrical | ||
| Voltage | 12 | |
| Battery | 575 CCA | |
| Standard Gauges | Hour meter | |
| Warning Lights | Battery/Alternator, engine warning | |
| Switches | Boom swing, boom height, creep propel, ignition | Clutch, track gage, track speed range, AutoSweep, |
| Controller | Vermeer C148 with AutoSweep | |
| Shutdown System | High engine temperature and low oil pressure | |
| Track Drive System | ||
| Track Frame Description | Tube and plate | |
| Track Type | Steel reinforced rubberized 9" (22.9 cm) width | 54 pads |
| Track Width - Retracted | 35 " | 88.9 cm |
| Track Width - Extended | 51 " | 129.5 cm |
| Type of Idler | Cast with sealed bearings | |
| Number of Idlers | 10 | |
| Track Drive Pump Type | Tandem gear pump, pressure balanced | |
| System Relief Pressure | 2900 psi | 199.9 bar |
| Pump flow at maximum RPM | 7.2 gpm | 27.3 L/min |
| Track Drive Motor Type | Integral motor and planetary unit | |
| Track Brake Type | Integrated into motor/planetary unit | |
| High Speed Travel | 1.25 mph | 2 km/h |
| Low Speed Travel | .73 mph | 1.2 km/h |
| Ground Bearing Pressure - Soft Ground | 4.1 psi | .3 bar |
| Options | ||
| Special Paint | Optional | |
| Extended Limited Warranty | Optional | |
| Remote Control Option | ||
| Radio Remote Control | Option | |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing | Boom height, propel, track mode, track speed range |
| Remote Display | Lighted LCD with RPM and all functions status | |
| Remote Range | 300 ' | 91.4 m |
